Photoplates PFG-03m
Posted: Fri Oct 28, 2005 10:36 pm
New emulsion PFG-03m No. 102-1 was made in "Slavich" after September interruption. And it is good emulsion. The sensitivity near 0,5 mJ/cm sq. No defects, no glass splinters.
But this emulsion need save only in refrigerator - the emulsion fog can be appear very quickly if save this emulsion in room (for high sensitivity).
But this emulsion need save only in refrigerator - the emulsion fog can be appear very quickly if save this emulsion in room (for high sensitivity).