Painting Holograms

From HoloWiki - A Holography FAQ
Revision as of 21:54, 11 May 2013 by Jsfisher (talk | contribs) (1 revision)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Painting the back of a hologram black is a great way to enhance the contrast of the image. Care must be taken to not destroy the image while painting it. (Do not try this before sealing DCG holograms!)

Tips

  • Paints that dry too quickly can damage some emulsions by shrinking them and making a crazed glass pattern.
  • Krylon Ultra flat black can dry very quickly if not applied in very thin coats.
  • Krylon gloss and flat seem to work well.
  • Make sure to protect the front of the hologram while painting.
  • Paint the edges if you are not going to frame the hologram to keep stray light from entering.
  • More thin coats is better than one thick coat.
  • Don't try to rush the drying.
  • Examine the hologram from the front after painting with a light source behind it to look for any thin spots.